21 pieces kits also available in titan-, wood- and alu-look! * cars with airbag: please order 1 x kev 552 983 00! Kevlar-look kits give your interior the high-tech look. Installed easily. Genuine kevlar fiber. Like new

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Spec stage 2+ clutch Porsche 911 3.3l turbo 930 97-88

What good is more horsepower if it isn_t transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more _bite_ while increasing reliability and performance.
...(choose a part on the right to read more)

General Fitment

- allows tie rods to be adjusted downward in extra precise 1/32” (1mm) increments, taking advantage of a wider adjustment range than other kits on the market.

- utilizes one of the highest quality alloy steel spherical rod ends available. teflon/kevlar lined, full length body, and capable of 30 degrees misalignment, so there is no binding throughout suspension travel or when the car is raised off the ground.

- 14mm “tapered fit” 12.9 grade central shaft wedges itself into the steering arm just like the factory Porsche tie rod ends, providing superior strength where it is needed. no drilling of the steering arm is required. beware of the "other" kits using inadequate 7/16" bolts.

- machine...(choose a part on the right to read more)

General Fitment

Spec stage 1 clutches features an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications.

Torque capacity: 275ft/lbs

Spec stage 1 clutches are for street and occasional track duty, with more performance ability than the stock clutch can provide.

General Fitment

997 GT3 rear spoiler fits all 997 tt includes: deck lid, aluminum upright, 3rd brake light housing and wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass. Also available with wing blade in kevlar / carbon FVD512997gt3rs2 tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once or...(choose a part on the right to read more)

997 GT3 rear spoiler fits 997turbo includes: deck lid, aluminum upright, 3rd brake light housing and kevlar/carbone wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass, kevlar-carbone. Also available with wing blade in fiber (gfk) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x

This item may need to be sourced from Germany and would take 2-4 ...(choose a part on the right to read more)

Highlights: made for up to 750*c (1,382*f) some track use and rally use. Low dust, high performance street pad with 20-25% % brake improvement. Capable of repeated heavy brake use without brake "fall-off". Very minimal disc/rotor damage characteristics. Features red "brake in' surface coating for instant safe braking after install. Superb material for European cars. Ece r 90 type approved for most cars. High performance lowest dust rating pads for prestige imports and faster street driving. Redstuff reduce dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from ...(choose a part on the right to read more)

High performance lowest dust rating pads for prestice imports and faster street driving. There are two reasons our customers love redstuff. First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge was as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up.

this material is a kevlar fibre based brake compound enhanced with ceramic particles. If you have previously tried ebc redstuf (pre-ceramic compound) this matierial is light years ahead. It lasts longer, it brakes be...(choose a part on the right to read more)

General Fitment

Tired of having to wash the car just due to brake dust build up? Ebc redstuff brake pads have you covered. They reduce brake dust by 60-90%, plus the minimal dust is safely removed with a wet sponge as redstuff does not contain steel fiber particles found in other pads. These pads also have excellent brake friction when cold and just get better as they warm up. The pads are composed of a kevlar fiber-based brake compound enhanced with ceramic particles. The benefits of this material are longevity, enhanced braking performance, quiet operation and reduced brake dust. Features: made for up to 750*c (1,382*f) for street, track and rally use. Low dust, high performance street pad with 20-25% braking improvement. Ca...(choose a part on the right to read more)

This manual support replaces the OEM hood shocks to save weight. It can be used on kevlar / gfk / aluminum hoods. The kit is comprised of genuine parts and was originally manufactured for the rennsport models. Weighs: .12 kg (.26 lbs.) sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Serienausstattung (wie recaro pro racer spg hans):
Sitzschale aus carbon-kevlar®-gewebe cfk, gewicht ca. 6,5 kg.



Recaro pro racer spa hans xl:
Sitzschale 35 mm breiter, gewicht ca. 7,0 kg

General Fitment

Material: .sp-g gfk/sp-a kevlar
Safety: .fia-approved
Weight: .sp-g 6.5 kg/sp-a 4.5 kg
Strap carrying out: .4- and 6- point

General Fitment

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Only for turbo or turbo loook body!

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

For racing cars.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness. they are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.

Bearing blocks, drop links, and swaybar arms are cnc machined from aircraft-quality 6061-t6 aluminum for its high strength/weight ratio.

Complete with fully adjustable drop links to eliminate suspension preload.

Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. no wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.

All necessary hardware is provided in zinc plated...(choose a part on the right to read more)

Made in europe by one of the manufacturers to Porsche. Extremely high-quality carbon / kevlar rear spoiler that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight - made of high strength, carbon / kevlar sold individually. 1 necessary per car. Please note: this is not the wider iroc whale tail. Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. P...(choose a part on the right to read more)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.